The development and examination of medical ozonized oil manufacturing equipment.

本研究的目的是研制出可以在几小时内实验生产医用臭氧化油的设备，而不使用产生的汞的准分子气体的微型冷阴极真空紫外线放电管，效率高，可回收，延长寿命，并实际使用。准分子灯的发展。研制出不使用汞的准分子灯以及传统的汞-氩冷阴极真空紫外线放电管，使产生杀菌紫外线、产生臭氧、荧光粉发光（RGB发光）和可见光发光成为可能，并可分别用于杀菌灯和臭氧析出管、背光灯和荧光灯的照明。并且，对于管径为6mm、管径为4mm的灯，寿命试验电流密度分别为0.26mA/mm^2和1.13mA/mm^2，寿命可达到2万小时以上，而且管壁也不会变黑。建议用GdB_6电极代替W电极可延长15万小时的寿命。因此，采用喷嘴结构的准分子灯，既抑制了卤素等活性气体与电极的化学反应，又不污染放电管的管壁和正柱空间，可以保持较长的使用寿命。医用臭氧化油制造设备的研制。：将橄榄油10g放入医用臭氧化制油设备中，以10mgO_3/L的臭氧-氧混合气体在传导速度1L /min的固定条件下通过15小时，进行合成。从合成化合物的^<13>C-NMR分析结果中，确认了臭氧三烯烃，并推测其为臭氧化橄榄油。实验还证明，油酸含量在80%以上的植物油，用该设备也能同样地合成臭氧化植物油。在未来，医用臭氧油制造设备有望实现商业化。少

The purpose of this study is that it produces the equipment which can produce the medical ozonized oil in several hours experimentally, while miniature cold cathode vacuum ultraviolet ray discharge tube of the excimer gas which does not use produced mercury that it is high-efficient and that the recycling is possible is made life-lengthen, and uses it practically.The development of the excimer lamp. : Developed excimer lamp which does not use the mercury as well as conventional mercury-argon cold cathode vacuum ultraviolet ray discharge tube, generation of sterilization ultraviolet ray, generation of the ozone, light emission (light emission of the RGB) of the phosphor and light emission of visible ray become possible, and they can respectively utilize it for germicidal lamp and ozone evolution tube, back light and fluorescent lamp for the lighting. And, in case of the lamp of 6mm tube diameter and 4mm, current density of the lifetest is each 0.26mA/mm^2 and 1.13mA/mm^2, and the life i … More s carrying out the lighting over the 20000 hours, and moreover, the tube wall does not blacken either. It is suggested that to stretch the 150000 hour life is possible by substituting the W electrode with the GdB_6 electrode. Therefore, developed excimer lamp with the nozzle structure is possible to keep the life long, since it suppresses the chemical reaction between active gas like halogen and electrode, and since it does not foul tube wall and positive column space of the discharge tube.The development of the medical ozonized oil manufacturing equipment. : It put olive oil 10g in the medical ozonized oil manufacturing equipment, and 10mgO_3/L ozone-oxygen mixed gas was passed in the fixed condition of conduction speed 1L,/min for 15 hours, and the synthesis was carried out. From ^<13>C-NMR analysis result of the synthetic chemical compound, triolefin ozonide was confirmed, and it was suggesuted to be the ozonized olive oil. Also, it was proven that plant oil which contains oleic acids to over 80% could similarly synthesize the ozonized plant oil by this equipment. In the future, it is regarded as commercializing the medical ozonized oil manufacturing equipment, by the logic development. Less