Research on Rapid Prototyping Systems Using Field Programmable Devices

使用现场可编程器件的快速原型系统研究

• 批准号: 9529077
• 负责人: Chung-Kuan Cheng
• 金额: $ 47.55万
• 依托单位: University of California-San Diego
• 依托单位国家: 美国
• 项目类别: Continuing Grant
• 财政年份: 1996
• 资助国家: 美国
• 起止时间: 1996-09-15 至 1999-12-31
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=9529077&HistoricalAwards=false
• 关键词: Research; Rapid; Prototyping; Systems; Using

Rapid prototyping systems composed of programmable gate arrays present many technical challenges affecting system utilization and performance. The objective of this research is the development of engineering methodologies which address these currently unresolved technical issues. Current rapid prototyping systems suffer several shortcomings, including engineering bottlenecks caused by time- consuming mapping processes, inadequate performance for real-time emulation of high-speed systems, and high cost resulting from poor system utilization due to the severe IO limit of programmable devices. The proposed research targets these key areas. Both hardware and CAD algorithm issues will be addressed. The proposed project will contribute to identify the bottlenecks of current prototyping systems and discovering novel solutions. This research will contribute to faster mapping processes, low cost - high utilization systems, and real-time emulation.

由可编程门阵列组成的快速原型制度带来了许多影响系统利用和性能的技术挑战。 这项研究的目的是开发工程方法，这些方法论解决了这些目前尚未解决的技术问题。 当前的快速原型制度遭受了几个缺点，包括耗时映射过程引起的工程瓶颈，由于可编程设备的严重IO限制而导致的系统利用率较差，因此高速系统实时仿真的性能不足以及高成本。 拟议的研究针对这些关键领域。 硬件和CAD算法问题都将被解决。 拟议的项目将有助于确定当前原型制度的瓶颈并发现新颖的解决方案。 这项研究将有助于更快的映射过程，低成本 - 高利用系统和实时仿真。