Data converters for spectrally-efficient broadband communication

该项目将探索模拟/数字数据转换器集成电路，以支持新出现的频谱效率高的宽带通信技术，如同轴广播电视电缆和宽带无线链路。目前的解决方案严重依赖于模拟电子信号处理，因此需要精心设计和校准模拟电路。这种模拟前端的可重构性有限，并且对于每个新应用或新标准都需要大量的重新设计和研发费用。更多地依赖数字信号处理(DSP)将更灵活，并允许更有效地使用可用的频谱。限制高数字化收发信机用于宽带通信的主要挑战是，它们需要能够以足够高的保真度将大范围通信频谱数字化的数据转换器。人们普遍认为，对于许多宽带应用来说，这种转换器要么不可能实现，要么会比它们寻求取代的模拟电路消耗更多的功率。这个项目试图通过重新考虑这些信念背后的假设来证明这些应用程序可行的数据转换器。具体地说，数字校正技术将根据已知的信号统计数据量身定做，从而能够使用低功率模拟CMOS电路来处理带宽超过1 GHz的通信信号的数据转换器。解决方案将在先进的cmos集成电路技术中展示，最终形成一种带有伴随数字信号处理器的最先进的原型数据转换器。合作伙伴和合作者是总部设在多伦多的Kapik Inc.，该公司是混合模拟/数字集成电路IP开发的专业公司。它们在这一领域确立的技术领先地位和对项目成果的具体商业利益是关键资产。

This project will explore analog/digital data converter integrated circuits in support of new and emerging spectrally-efficient broadband communication technologies, such as over coaxial broadcast TV cables and broadband wireless links. Current solutions rely heavily upon analog electronic signal processing, and therefore require carefully designed and calibrated analog circuitry. Such analog front ends have limited reconfigurability and require significant redesign and R&D expense for each new application or new standard. A heavier reliance upon digital signal processing (DSP) would be more flexible and permit more efficient use of available spectrum. The main challenge limiting the use of highly-digital transceivers for broadband communication is their need for data converters that can digitize wide swaths of communication spectrum with sufficient fidelity. It is widely believed that for many broadband applications, such converters are either impossible to realize or would consume far more power than the analog circuits they seek to replace. This project seeks to demonstrate viable data converters for those applications by reconsidering the assumptions underlying those beliefs. Specifically, digital correction techniques will be tailored to the known signal statistics enabling the use of low-power analog CMOS circuits for data converters processing communication signals at bandwidths exceeding 1GHz. Solutions will be demonstrated in advanced CMOS integrated circuit technologies, culminating in a state-of-the-art prototype data converter with accompanying DSP. The partner and collaborator is Toronto-based Kapik Inc., specialists in the development of mixed analog/digital integrated circuit IP. Their established technical leadership in this area and specific commercial interest in the project outcomes are key assets.