Development of a sensor-based generic remote project delivery platform

这个项目的目的是开发一个通用的平台，提供远程设计项目模块。开发的产品将包括一些标准组件，如I/O接口，摄像头，声卡;和一些基于传感器的硬件，具有灵活的接口。这将是一个可编程的框架，可以用软件升级，新的项目模块可以从网站下载到平台上。根据项目模块，将确定传感器板及其要求。例如，由低功耗小型化霍尔效应传感器组成的基于Arduino的无线传感器网络可用于测量特定项目平台上电机的速度，然后在屏幕上显示适当的指令，供用户根据感测结果调整设计参数。然而，无线传感器，虽然消除了杂乱的电线，但在这方面需要解决的挑战

This project aims to develop a generic platform to deliver design project modules remotely. The developed product will encompass some standard components such as I/O interface, cameras, sound cards; and some sensor-based hardware with flexible interface. It will be a programmable framework that can be upgraded with software and new project modules can be downloaded into the platform from the website. Depending on the project modules, the sensor boards and its requirements will be identified. For example, Arduino-based wireless sensor network consisting of a low-powered miniaturized Hall-effect sensor can be used to measure the speed of the motor on the platform for a particular project, and then appropriate instructions can be displayed on the screen for the users to adjust the design parameters based on the sensed result. However, the wireless sensors, though eliminating the messy wires, come with challenges that need to be addressed in this