Research on Advanced Machine Tool Spindle Structure

先进机床主轴结构研究

• 批准号: 05452133
• 负责人: SHINNO Hidenori
• 金额: $ 4.54万
• 依托单位: Tokyo institute of Technology
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for General Scientific Research (B)
• 财政年份: 1993
• 资助国家: 日本
• 起止时间: 1993 至 1994
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/en/grant/KAKENHI-PROJECT-05452133/
• 关键词: Machine Tool; Spindle System; Structural Design; Rigidity; Thermal Deformation; Simulation; Design Methodology; System Machine; 双主軸構造; 動的挙動

Development of advanced machine tool spindle structure has recently become the most important problem to materialize system machine for highly automated manufacturing system such as FMS (Flexible manufacturing system) or FMC (Flexible manufacturing cell).However, there is no effective spindle structure to realize the high performances spindle system, i.e., static and dynamic rigidities, thermal deformation, compactness, ease of operation, multi-purpose operation, high rotational speed, etc.In this research project, therefore, to establish a design methodology of advanced machine tool spindle structure, actual machine tool spindle systems based on a new design concept, i, e. twin and multi-layred spindle systems, have been proposed and investigated. Validity of the proposed spindle structures have also been verified through experimental investigations under various constraints. In addition, a design methodology of machine tool spindle system based on a new concept has been proposed and evaluated its performance through some computer simulations.

开发先进的机床主轴结构已成为实现FMS（Flexible Manufacturing System）或FMC（Flexible Manufacturing Cell）等高度自动化制造系统的关键问题，但目前还没有一种有效的主轴结构来实现高性能的主轴系统，即：因此，本研究计划建立先进机床主轴结构的设计方法，实际的机床主轴系统基于一种新的设计理念，即：已经提出并研究了双层和多层主轴系统。所提出的主轴结构的有效性也已通过各种约束条件下的实验研究进行了验证。此外，基于一个新的概念，机床主轴系统的设计方法已被提出，并通过一些计算机模拟评估其性能。

项目成果

Hidenori SHINNO,Yoshimi ITO and Hiroshi TADANO: "Basic Layout Design with Multiple-Layred Decision Making and Transit Evaluation" Annals.of the CIRP. Vol.43-1. 111-114 (1994)

Hidenori SHINNO、Yoshimi ITO 和 Hiroshi TADANO：“具有多层决策和交通评估的基本布局设计”CIRP 年鉴。

稲葉千佳郎、村瀬巌、新野秀憲、伊東誼: "工作機械の主軸受コンタクトパターン変化の超音波インプロセス計測" 日本機械学会論文集(C編). 61. (1995)

Chiyoshi Inaba、Iwao Murase、Hidenori Niino、Yoshi Ito：“机床中主轴承接触模式变化的超声波过程测量”日本机械工程师学会汇刊（ed.C）61。（1995）。

Chikao INABA,Iwao MURASE,Hidenori SHINNO and Yoshimi ITO: "In-process Measurement of Contact Pattern Variations in Rotating Main Bearing of Machine Tools Using Ultrasonic Waves Method" Transactions of the JSME.Vol.61 (to be published). (1995)

Chikao INABA、Iwao MURASE、Hidenori SHINNO 和 Yoshimi ITO：“使用超声波法对机床旋转主轴承中的接触模式变化进行过程测量”JSME 交易.Vol.61（即将出版）。

H.Shinno,Y.Ito,H.Tadano: "Basic Layout Design with Multiple-Layered Decision Making and Transit Evaluation" Annals.of the CIRP. 43/1. 111〜114 (1994)

H. Shinno、Y. Ito、H. Tadano：“具有多层决策和交通评估的基本布局设计”CIRP 年鉴 43/1 (1994)。

稲場 千佳郎,村瀬 巌,新野 秀憲,伊東 誼: "工作機械の主軸受コンタクトパターン変化の超音波インプロセス計測" 日本機械学会論文集(C編). 61. 未定 (1995)

Chiyoshi Inaba、Iwao Murase、Hidenori Niino、Yoshi Ito：“机床中主轴承接触模式变化的超声波过程测量”日本机械工程师学会会刊（C 版）61。待定（1995 年）。